Breeze

5 Year Guarantee Wall and Ceiling Paint

Sparcolux Breeze is an acrylic wall and ceiling paint that dries to a smooth, matt finish. Ideal for both interior and exterior use, Breeze is a durable paint that offers an excellent finish to both ceilings and walls, good weatherability, and comes with a 5-year guarantee. 

The smooth matt finish is optimised for colour, offering excellent obliteration to cover minor imperfections and hairline cracks. This product is water-based, low splatter and low-odour making it easy to apply and clean.

Sparcolux Breeze offers the following benefits:

Weather resistance

Interior and exterior paint with a 5 year guarantee

High solids

For superior obliteration of hairline cracks, surface imperfections and overcoating of dark colours

Elegant matt finish

For an attractive, smooth finish

Low Splatter

for easy application with roller, brush or spraying

COLOURS

WHITE

CLOUD GREY

SILHOUETTE

STORMY NIGHT

BRONZE OLIVE

DUSTY OLIVE

BUFFED OAK

SAND STONE

COFFEE CREME

PEACH PEBBLE

MUSHROOM CREME

WARM SAND

BISCUIT

VICTORIA MIST

FONDANT

SOFT IVORY

APRICOT WHISPER

BUTTER CREAM

Pastel Base for pastel tinting

PACK SIZE

  • 5 Litre
  • 20 Litre

Colour 

18 standard colours, including White. 

Appearance 

Matt

Viscosity

90 -105 KUs at 25°C

SG

1.40

Mass Solids

45 – 50%

Volume Solids 

25- 30 %

Shelf Life 

1 year 

Storage Conditions 

Away from direct sunlight, heat, cold

Pack Size 

1 Litre, 5 Litre, 20 Litre 

Method  

Brush, Roller, Spay

Spreading Rate 

8-10 m2 per litre

Number of coats 

2, unless specified otherwise

Drying time

Touch dry: 1-2 hours

Allow 7 days to cure before washing.

Overcoating

3-4 hours at 25ºC

Thinning

Brush, Roller – not recommended

Spraying: – 10% Water by volume

Cleaning 

Water 

  • Read all instructions before use.

    Ensure all substrates are thoroughly clean, sound and free of any contaminants such as dirt, grease, salts, and algae. Repair any cracks on the surface and clean using Sparcolux Sugar Soap. 

     

    New Cement 

    New cements must be allowed to cure for a minimum 21 days. 


    Once sufficiently clean and dry, prime substrate with Sparcolux WB Plaster Primer or Sparcolux SB Plaster Primer. Refer and follow the directions per the primer used. 

    New plaster, gypsum plaster, fibre cement brick work

    Clean substrate well and allow to dry. 


    Once sufficiently clean and dry, prime substrate with Sparcolux WB Plaster Primer or Sparcolux SB Plaster Primer. Refer and follow the directions per the primer used.

    Previously painted surfaces

    Remove algae, lichen, loose materials and flaking paint with a scrubbing brush or high pressure hose. Wash area with Sparcolux Sugar Soap. If required, apply an anti-fungal wash, then rinse with water. 


    Seal powdery surfaces with Sparcolux Keybond or with Sparcolux SB Plaster Primer. 


    Glossy surfaces should be gently sanded, cleaned and dried. 

PRODUCT SHEET