Satin Sheen

8 year guarantee wall and ceiling paint

Sparcolux Satin Sheen is a premium quality acrylic wall and ceiling paint with a luxurious sheen finish. Ideal for both interior and exterior wall and ceiling use, Satin Sheen is formulated to give a durable, weather resistant coating that comes with an 8-year guarantee. Satin Sheen is an easy-cleaning paint that gives an attractive, long lasting, dirt resistant finish. 

 

The luxurious sheen finish is optimised for colour, offering excellent obliteration to cover minor imperfections and hairline cracks. This product is water-based, low splatter and low-odour making it easy to apply and clean.

Sparcolux Satin Sheen benefits include:

Luxurious finish

Medium sheen satin finish

Acrylic formulation

For a long lasting, weather and UV resistant coating

Low maintenance

Easy-cleaning, fully washable and dirt resistant

Superior weatherability

For optimal protection against all South African weather

Premium quality

Comes with a 8 year guarantee

COLOURS

WHITE

ANTIQUE GREY

GREY MYSTIC

QUICK SIlVER

PALE WHEAT

SOFT REFLECTION

BUTTERSCOTCH

ALABASTER

WINTER DUSK

OLD STONE

BAILEY

SAFARI SAND

Tint Bases for the full range of colour tinting

PACK SIZE

  • 5 Litre
  • 20 Litre

Colour 

12 standard colours, including White. 

Appearance 

Sheen

Gloss 

45-55 GUs

Viscosity

90 -105 KUs at 25°C

SG

1.20-1.25

Mass Solids

38 – 43%

Volume Solids 

25- 30 %

Shelf Life 

1 year 

Storage Conditions 

Away from direct sunlight, heat, cold

Pack Size 

1 Litre, 5 Litre, 20 Litre 

Method  

Brush, Roller, Spay

Spreading Rate 

10-12 m2 per litre

Number of coats 

2, unless specified otherwise

Drying time

Touch dry: 1-2 hours

Allow 5 days before washing.

Overcoating

3-4 hours at 25ºC

Thinning

Brush, Roller – not recommended

Spraying: – 10% Water by volume

Cleaning 

Water 

  • Read all instructions before use.

    Ensure all substrates are thoroughly clean, sound and free of any contaminants such as dirt, grease, salts, and algae. Repair any cracks on the surface and clean using Sparcolux Sugar Soap. 

     

    New Cement 

    New cements must be allowed to cure for a minimum 21 days. 


    Once sufficiently clean and dry, prime substrate with Sparcolux WB Plaster Primer or Sparcolux SB Plaster Primer. Refer and follow the directions per the primer used. 

    New plaster, gypsum plaster, fibre cement brick work

    Clean substrate well and allow to dry. 


    Once sufficiently clean and dry, prime substrate with Sparcolux WB Plaster Primer or Sparcolux SB Plaster Primer. Refer and follow the directions per the primer used.

    Previously painted surfaces

    Remove algae, lichen, loose materials and flaking paint with a scrubbing brush or high pressure hose. Wash area with Sparcolux Sugar Soap. If required, apply an anti-fungal wash, then rinse with water. 


    Seal powdery surfaces with Sparcolux Keybond or with Sparcolux SB Plaster Primer. 


    Glossy surfaces should be gently sanded, cleaned and dried. 

PRODUCT SHEET