Gloss Enamel

- 5 year guarantee gloss enamel

Sparcolux Gloss Enamel is a top quality, high-gloss alkyd enamel that provides a decorative and protective finish on numerous surfaces. This Gloss Enamel is easily washable and dries to a tough, durable finish that offers excellent weather resistance. This product is scratch and scuff resistant making it ideal for trims, windows, doors and interior walls.

Use on new or painted plaster, cement, fibre-cement, composition boarding, wood, brick or metal that have been suitably primed and undercoated.

Sparcolux Gloss Enamel benefits include:

Premium quality

5 year guarantee

Extremely durable

Ideal for high wear areas such as skirtings, furniture, doors, etc

Scuff resistant

Scratch and stain resistant

UV resistant

Fade resistant for a longer lasting beautiful finish

COLOURS

WHITE

RICH CREAM

GOLDEN YELLOW

CANARY YELLOW

SIGNAL RED

TEAK BROWN

GOLDEN BROWN

PWB BROWN

STRONG BLUE

PRUSSIAN BLUE

FENCE GREEN

BR GREEN

BRILLIANT GREEN

BLACK

SILVER GREY

STORMY GREY

ANTHRACITE

Tint Bases for the full range of colour tinting

PACK SIZE

  • 1 Litre
  • 5 Litre

Colour 

White, Black and Standard Colour Range.

For colour consistency, ensure same batch numbers

Appearance 

High Gloss (except Matt versions)

Gloss 

>90 GUs

Viscosity

180”- 200” at 23°C

SG

0.97-1.02

Mass Solids

33 – 38%

Volume Solids 

25 – 30%

Shelf Life 

1 year 

Storage Conditions 

Normal

Pack Size 

1 Litre, 5 Litre 

Method:

Brush, roller or spray 

Spreading Rate: 

8 – 10m² per litre

Number of coats: 

2 – 3

Drying time: 

Touch dry 4 hours, Hard 16 Hours

Overcoating:

16 Hours

Thinning:

Not recommended

Cleaning:

Mineral Turpentine

Product Type:

Alkyd Resin

  • SURFACE PREPARATION

    Ensure that surfaces are dry, sound, and free from dust, dirt, grease and oil before painting.

    Fill imperfections with Filler.

    NEW SURFACES:
    Cement Plaster, Gypsum Plaster (Rhinolite, etc), Gypsum Board (Rhinoboard, etc ), Fibre Cement, Unglazed Brick:
    Prime with Sparcolux Solvent-based Plaster Primer. Apply a full coat to seal surface properly.

    Wooden Surfaces:
    Seal knots with knot seal. Prime with Sparcolux Wood Primer following relevant preparation.

    Mild Steel:
    Prime with Sparcolux Metal Primer following relevant preparation guidelines.

    Galvanised Iron:
    Prime with Sparcolux Galvanised Iron Primer following relevant preparation guidelines.

    Plastic/PVC Downpipes:
    Sand gently and prime with Sparcolux Metal Primer. Apply a full coat to seal surface properly.

    PREVIOUSLY PAINTED:
    Good condition:
    Clean with sugar soap, rinse with water and  sand glossy enamel areas to matt finish. Prime bare masonry areas with Sparcolux Solvent Based Plaster Primer.

    Poor condition:
    Remove loose paint either physically (scraper, wire brush, etc) or, if required use a paint stripper. Rinse well with water and allow to dry. Fill imperfections with Polyfilla

    Undercoat:
    Once all surfaces have been correctly prepared and primed, apply a coat of Sparcolux Universal Undercoat.

PRODUCT SHEET