Super Acrylic
8 year guarantee Wall and Ceiling paint
Sparcolux Super Acrylic is a premium quality acrylic wall and ceiling paint that is ideal for both interior and exterior wall and ceiling use. The premium acrylic formulation gives a durable, weather resistant coating that comes with an 8-year guarantee.
Super Acrylic is an easy-cleaning paint that is washable and dirt resistant giving a long lasting, attractive finish.
The smooth matt finish is optimised for colour, offering excellent obliteration and long term UV resistance to cover minor imperfections and hairline cracks. This product is water-based, low splatter and low-odour making it easy to apply and clean.
Sparcolux Super Acrylic benefits include:
Premium quality
Comes with a 8 year guarantee
Superior Weatherability
For optimal protection against all South African weather
Long lasting
Acrylic Formulation for long lasting, weather and UV resistant coating
East cleaning
Easy-cleaning, washable and dirt resistant
Luxurious finish
Luxurious smooth matt finish
COLOURS
WHITE
Tint Bases for the full range of colour tinting
PACK SIZE
- 1 Litre
- 5 Litre
- 20 Litre
Colour | White and Tint Bases |
Appearance | Matt |
Gloss | 10-12 GUs |
Viscosity | 90 -105 KUs at 25°C |
SG | 1.20-1.25 |
Mass Solids | 38 – 43% |
Volume Solids | 25- 30 % |
Shelf Life | 1 year |
Storage Conditions | Away from direct sunlight, heat, cold |
Pack Size | 1 Litre, 5 Litre, 20 Litre |
Method | Brush, Roller, Spay |
Spreading Rate | 10-12 m2 per litre |
Number of coats | 2, unless specified otherwise |
Drying time | Touch dry: 1-2 hours Allow 5 days before washing. |
Overcoating | 3-4 hours at 25ºC |
Thinning | Brush, Roller – not recommended Spraying: – 10% Water by volume |
Cleaning | Water |
Read all instructions before use.
Ensure all substrates are thoroughly clean, sound and free of any contaminants such as dirt, grease, salts, and algae. Repair any cracks on the surface and clean using Sparcolux Sugar Soap.
New Cement
New cements must be allowed to cure for a minimum 21 days.
Once sufficiently clean and dry, prime substrate with Sparcolux WB Plaster Primer or Sparcolux SB Plaster Primer. Refer and follow the directions per the primer used.
New plaster, gypsum plaster, fibre cement brick work
Clean substrate well and allow to dry.
Once sufficiently clean and dry, prime substrate with Sparcolux WB Plaster Primer or Sparcolux SB Plaster Primer. Refer and follow the directions per the primer used.
Previously painted surfaces
Remove algae, lichen, loose materials and flaking paint with a scrubbing brush or high pressure hose. Wash area with Sparcolux Sugar Soap. If required, apply an anti-fungal wash, then rinse with water.
Seal powdery surfaces with Sparcolux Keybond or with Sparcolux SB Plaster Primer.
Glossy surfaces should be gently sanded, cleaned and dried.