Smart Koat

2 Year Guarantee Wall and Ceiling Paint

Smart Koat is a general purpose hi-cover contracter filler coat. This functional high-solids wall and ceiling coating obliterates, levels and hides surface imperfections, giving a smooth matt finish.

Smart Koat is ideal for newly primed or previously painted interior and exterior walls requiring a quick-drying matt finish. This product is also an ideal top coat for interior ceiling boards. This product is water-based, low splatter and low-odour making it easy to apply and clean.

Sparcolux Smart Koat benefits include:

High Solids

For good obliteration

Filler coat

Smooths over surface imperfections and hairline cracks

Elegant matt

For an attractive top coat finish

Attractive colours

Range of 10 colours to choose from

COLOURS

WHITE

MIST
GREY

LIGHTHOUSE

GOLDEN WHEAT

SERENADE

SPANISH
GOLD

PEACH
BLOOM

SUNRISE
ORANGE

AUTUMN
ORANGE

BURMA

Pastel Base for pastel tinting

PACK SIZE

  • 5 Litre
  • 20 Litre

Colour 

10 standard colours, including White. 

Appearance 

Matt

Viscosity

90 -105 KUs at 25°C

SG

1.40 – 1.45

Mass Solids

45 – 50%

Volume Solids 

30- 35 %

Shelf Life 

1 year 

Storage Conditions 

Normal

Pack Size 

5 Litre, 20 Litre 

Method  

Brush, Roller, Spay

Spreading Rate 

8-10 m2 per litre

Number of coats 

2, unless specified otherwise

Drying time

Touch dry: 30-60 minutes

Overcoating

3-4 hours at 25ºC

Thinning

Brush, Roller – not recommended

Spraying: – 10% Water by volume

Cleaning 

Water 

  • Read all instructions before use.

    Ensure all substrates are thoroughly clean, sound and free of any contaminants such as dirt, grease, salts, and algae. Repair any cracks on the surface and clean using Sparcolux Sugar Soap. 

     

    New Cement 

    New cements must be allowed to cure for a minimum 21 days. 


    Once sufficiently clean and dry, prime substrate with Sparcolux WB Plaster Primer or Sparcolux SB Plaster Primer. Refer and follow the directions per the primer used. 

    New plaster, gypsum plaster, fibre cement brick work

    Clean substrate well and allow to dry. 


    Once sufficiently clean and dry, prime substrate with Sparcolux WB Plaster Primer or Sparcolux SB Plaster Primer. Refer and follow the directions per the primer used.

    Previously painted surfaces

    Remove algae, lichen, loose materials and flaking paint with a scrubbing brush or high pressure hose. Wash area with Sparcolux Sugar Soap. If required, apply an anti-fungal wash, then rinse with water. 


    Seal powdery surfaces with Sparcolux Keybond or with Sparcolux SB Plaster Primer. 


    Glossy surfaces should be gently sanded, cleaned and dried. 



    APPLICATION INSTRUCTIONS

    • Stir very well before use!!
    • Do not dilute – this product is ready to use. 
    • Apply product with a brush, roller or spray system
    • Apply 2 coats for complete obliteration, unless over coating a dark colour with a pastel shade, in which case apply 3 coats 
    • Allow 3 – 4 hours drying time between coats.
    • Clean brushes with water. Product thinning is not recommended.



PRODUCT SHEET